Bosch Appliances D7412G, D9412G manual ## Defer Test, ## Hourly Report, ## Defer Status

D9412G/D7412G Program Entry Guide 5.0 RADXSKED

EN 107

9Test Report: This function emulates the Send Report? command center function. This function generates a Test Report ONLY from Area 1 but contains panel-wide status information. The report is sent to the phone(s) programmed for Test and Status Reports in Section 2.3.8 Dialing Attempts.

If Expand Test Prt in Phone is programmed Yes, the Test Report also includes all off-normal states for events listed in Diagnostic Reports and Test Reports (see Section 2.3.8 Dialing Attempts).

The Test Report can be deferred if any other report was sent since the last Test Report. To defer the Test Report, program S## Defer Test.

The Test Report can be sent every hour beginning at the time scheduled in S## Time. To send a Test Report every hour, program S## Hourly Rpt.

10Status Report: This function generates a Status Report for each area that is enabled. The report is sent to the phone(s) programmed for Test and Status Reports in Routing.

The Status Report can be deferred if any other report was sent since the last Status Report. To defer the Status Report, program S## Defer Status.

S## Defer Test

Default: No

Selection: Yes or No

Enable sked to defer the Test Report

S## Hourly Report

Default: No

Selection: Yes or No

Enable sked to send the Test Report every hour.

S## Defer Status

Default: No

Selection: Yes or No

Enable sked to defer the Status Report.

Yes	Defer the Test
	Report.
No	Send the Test
	Report on
	schedule.
Yes	Send the Test
	Report every hour.
No	Send the Test
	Report only as
	scheduled.

Yes	Defer the Status
	Report.
No	Send the Status
	Report on
	schedule.

Bosch Security Systems 1/04 47775E