D9412G/D7412G Program Entry Guide 2.0 9000MAIN

EN 65

-D1255 command center displays a sequential count after each point is activated and restored as well as the text for the point.

-The D1255 command center displays ALL PNTS TESTED.

-If enabled in Routing, Service Start and Service End are reported at the central station receiver for the beginning and end of the test.

Point 128 and Point 248 appear as missing. This is normal. These points are used for supervising the Zonex bus 1 (Point 128) and Zonex bus 2 (Point 248). If these points indicate a short, the Zonex bus has a fault.

Extra points can be viewed using this function. Extra points occur under two conditions: an extra point is a point wired electrically to the Zonex bus with a blank P### Point Index, or two Zonex devices exist for the same Zonex address.

L## Default Text

Default:

See Program Record Sheet

Selection: Blank or E

#34 Default Text [COMMAND][5][7]

Temporarily display the armed state of the area using control panel default text, A# AREA # IS ON, A# NOT READY, A# AREA # IS OFF, and A#

ACCOUNT IS ON.

L## Change Skeds

Default:

See Program Record Sheet

Selection: Blank or E

#35 Change Skeds [COMMAND][5][2]

Change skeds that can be edited.

Skeds can be restricted from being edited by programming S## Time Edit? to No.

Custom Functions

L## C Function 128 [through 143]

Default:

See Program Record Sheet

Selection: Blank or E

128 to 143 Enable Custom Function 128 through

143 (MENU FUNCTION only)

Execute the desired Custom Function.

Report Levels

L## Force Arm

Default:

See Program Record Sheet

 

 

Selection: Blank or E

Allows a user with this authority level to Force Arm.

L## Area O/C

Default:

See Program Record Sheet

 

 

Selection: Blank or E

Generate Opening and Closing Reports if the area where this authority level is assigned sends Opening and Closing Reports.

L## Restricted O/C

Default:

See Program Record Sheet

 

 

Selection: Blank or E

Initiate an Opening Report if a bell is ringing or a Closing Report when force/bypass arming. The area where this authority level is assigned must be programmed for restricted openings and closings (see the A# Restrictd O/C prompt in Section 2.9.5 Open/Close Options)

.L## Perimeter O/C

Default:

See Program Record Sheet

 

 

Selection: Blank or E

Report Perimeter Opening and Closing Reports if the area where this authority level is assigned sends Perimeter Opening and Closing Reports.

L## Send Duress

Default:

See Program Record Sheet

 

 

Selection: Blank or E

Send a Duress Report if the area where this authority level is assigned sends duress. (See the A# Duress Enable prompt in Section 2.9 Area Parameters).

L## Passcode Arm

Default:

See Program Record Sheet

 

 

Selection: Blank or E

Arm an area by entering a passcode and pressing [ENTER].

Bosch Security Systems 1/04 47775E

Page 65
Image 65
Bosch Appliances D7412G, D9412G ## Default Text, ## Change Skeds, ## C Function 128 through, ## Force Arm, ## Area O/C

D7412G, D9412G specifications

Bosch has established itself as a leader in the appliance industry, known for its commitment to innovation, performance, and design. Among its impressive lineup, the Bosch D9412G and D7412G stand out as two highly sought-after models that combine advanced technologies with user-friendly features.

The Bosch D9412G is designed for those who demand top-of-the-line efficiency and functionality in their kitchen appliances. One of its most notable features is the powerful dual-fan system that ensures even and efficient cooking. This model is equipped with a robust stainless steel build and sleek finish, offering both durability and style.

The D9412G also boasts Bosch's innovative AutoCook technology, which automatically adjusts cooking times and temperatures based on the selected dish. This feature not only simplifies meal preparation but also ensures consistent results every time. Additionally, the model includes a built-in sensor that monitors food moisture levels, making it easier to achieve perfectly cooked meals without constant supervision.

In contrast, the Bosch D7412G caters to users seeking a balance of practicality and modern design. It maintains many of the advanced features of the D9412G while being more compact, making it ideal for smaller kitchens. The D7412G also utilizes the dual-fan system, ensuring that cooking is quick and even, with reduced energy consumption.

Both models are equipped with Bosch’s EcoSilent motor, which provides powerful performance while maintaining whisper-quiet operation. This is particularly beneficial for open-concept living spaces where noise levels matter. Additionally, both appliances come with a variety of cooking modes, including convection baking, broiling, and roasting, offering users versatility in their culinary endeavors.

The Bosch D9412G and D7412G also focus on user experience, with intuitive controls and easy-to-read displays that allow for effortless navigation. Their self-cleaning features save time and effort, ensuring that maintaining a clean appliance is straightforward.

In summary, Bosch's D9412G and D7412G models epitomize modern appliances that seamlessly blend technology and design with high-performance cooking capabilities. Whether you choose the high-capacity D9412G or the space-saving D7412G, you can expect exceptional results in your culinary endeavors, backed by Bosch's reliable engineering and quality.