D9412G/D7412G Program Entry Guide 4.0 RADXPNTS

EN 78

P ##

Description

Type

 

Selection

 

2Interior: Interior points are armed only by master arming the area. They are NOT armed when using Perimeter Arming functions. These points are typically used to monitor interior detection devices such as interior doors, motion detectors, photoelectric beams, and carpet mats.

Instant Interior Points: Interior points are usually programmed for an instant alarm (see Section

4.1.1Point Responses). Points programmed for instant alarms generate alarms immediately, even during entry or exit delay.

Delayed Interior Points: Interior points can be programmed for a delayed point response. A delayed response means that if the point is tripped while the area is armed, it initiates entry delay. It does not generate an alarm until entry delay expires.

When an Interior point is programmed for entry delay, entry delay time is always provided. If the area is in entry delay when the Interior point trips, the control panel compares the remaining entry delay time to the time programmed for the Interior point. If the Interior point’s entry delay time is less than the remaining time, it shortens the entry delay time.

Delayed points can also initiate an entry tone at the command center (see the P## Ent Tone Off prompt in Section 4.1.1 Point Responses).

In some cases, you may need to create an Interior point that causes an instant alarm only if entry delay protection is not tripped first. Use Interior Follower to create this type of protection.

3Interior Follower: Interior Follower points are armed only by master arming the area. They are NOT armed when using Perimeter-Arming functions.

An Interior Follower point does not create an alarm if it trips while the area is in entry delay. An Interior Follower does not change the amount of remaining entry delay time.

If no entry delay is in effect when the Interior Follower trips, it creates an instant alarm.

You must program a delayed Point Response (4, 5, 6, 7, or 8) for an Interior Follower point. The control panel ignores the entry in P## Entry Delay for an Interior Follower point.

Note:

It may be necessary to increase the debounce count for Interior Follower points to prevent Interior Follower points from going into alarm before the control panel recognizes that a Perimeter Delay point was faulted. Program the Interior Follower’s debounce for one number higher than the debounce count on Perimeter delay

Bosch Security Systems 1/04 47775E

Page 77 Page 79
Page 78
Image 78
Bosch Appliances manual D9412G/D7412G Program Entry Guide 4.0 Radxpnts
Page 77 Page 79

D7412G, D9412G specifications

Bosch has established itself as a leader in the appliance industry, known for its commitment to innovation, performance, and design. Among its impressive lineup, the Bosch D9412G and D7412G stand out as two highly sought-after models that combine advanced technologies with user-friendly features.

The Bosch D9412G is designed for those who demand top-of-the-line efficiency and functionality in their kitchen appliances. One of its most notable features is the powerful dual-fan system that ensures even and efficient cooking. This model is equipped with a robust stainless steel build and sleek finish, offering both durability and style.

The D9412G also boasts Bosch's innovative AutoCook technology, which automatically adjusts cooking times and temperatures based on the selected dish. This feature not only simplifies meal preparation but also ensures consistent results every time. Additionally, the model includes a built-in sensor that monitors food moisture levels, making it easier to achieve perfectly cooked meals without constant supervision.

In contrast, the Bosch D7412G caters to users seeking a balance of practicality and modern design. It maintains many of the advanced features of the D9412G while being more compact, making it ideal for smaller kitchens. The D7412G also utilizes the dual-fan system, ensuring that cooking is quick and even, with reduced energy consumption.

Both models are equipped with Bosch’s EcoSilent motor, which provides powerful performance while maintaining whisper-quiet operation. This is particularly beneficial for open-concept living spaces where noise levels matter. Additionally, both appliances come with a variety of cooking modes, including convection baking, broiling, and roasting, offering users versatility in their culinary endeavors.

The Bosch D9412G and D7412G also focus on user experience, with intuitive controls and easy-to-read displays that allow for effortless navigation. Their self-cleaning features save time and effort, ensuring that maintaining a clean appliance is straightforward.

In summary, Bosch's D9412G and D7412G models epitomize modern appliances that seamlessly blend technology and design with high-performance cooking capabilities. Whether you choose the high-capacity D9412G or the space-saving D7412G, you can expect exceptional results in your culinary endeavors, backed by Bosch's reliable engineering and quality.
Top Page Image Contents