D9412G/D7412G Program Entry Guide 2.0 9000MAIN

EN 72

Comm Fail

Default: Blank

Selection: Blank, 1 to 128 (1 to 64 for D7412G), A, B, or C

This relay activates when a control panel is unable to communicate a report after making ten attempts to each routing destination. At the same time, COMM FAIL RT ## displays at the command center. This relay automatically resets when a report is sent successfully.

Use this relay to report primary digital report failure to an alternate communication device.

Log % Full

Default: Blank

Selection: Blank, 1 to 128 (1 to 64 for D7412G), A, B, or C

Enter the number of the relay that activates when the log reaches the programmed percentage of its capacity as programmed in RAM Parameters program item Log % Full. This relay provides a steady output until a Get Log and Set Pointer is performed from the RPS.

Summary Fire

Default: Blank

Selection: Blank, 1 to 128 (1 to 64 for D7412G), A, B, or C

Enter the number of the relay that activates when any Fire point in the system (P## Type 0, P## Fire Yes) goes into alarm. This relay provides a steady output until all Fire points in the system are returned to normal.

Summary Alarm

Default: Blank

Selection: Blank, 1 to 128 (1 to 64 for D7412G), A, B, or C

Enter the relay’s number that activates when a Non- fire point goes into alarm. This relay provides a steady output until the alarm is acknowledged by a valid passcode then cleared from alarm memory with an acknowledgment at the command center.

This relay does not activate for silent alarms.

Summary Fire Tbl

Default: Blank

Selection: Blank, 1 to 128 (1 to 64 for D7412G), A, B, or C

This relay activates when any Fire point in the control panel is in trouble, or if a Fire Supervision point is missing. This relay provides a steady output until all Fire points restore to a normal condition.

Summary SupFire

Default: Blank

Selection: Blank, 1 to 128 (1 to 64 for D7412G), A, B, or C

Activates when any Fire Supervisory point in the control panel is in a supervisory condition (off normal). This relay provides a steady output until all Fire Supervisory points are restored to a normal condition.

Summary Trouble

Default: Blank

Selection: Blank, 1 to 128 (1 to 64 for D7412G), A, B, or C

Activates when any Non-fire point in the control panel is in a trouble condition. This relay provides a steady output until the user at the command center acknowledges the trouble.

Summary SupBurg

Default: Blank

Selection: Blank, 1 to 128 (1 to 64 for D7412G), A, B, or C

Activates when any Non-fire Supervisory point in the control panel is in a supervisory condition, or if a Supervisory Burg point is missing. This relay provides a steady output until it is acknowledged at the command center.

Bosch Security Systems 1/04 47775E

Page 72
Image 72
Bosch Appliances D9412G Comm Fail, Summary Alarm, Summary Fire Tbl, Summary SupFire, Summary Trouble, Summary SupBurg

D7412G, D9412G specifications

Bosch has established itself as a leader in the appliance industry, known for its commitment to innovation, performance, and design. Among its impressive lineup, the Bosch D9412G and D7412G stand out as two highly sought-after models that combine advanced technologies with user-friendly features.

The Bosch D9412G is designed for those who demand top-of-the-line efficiency and functionality in their kitchen appliances. One of its most notable features is the powerful dual-fan system that ensures even and efficient cooking. This model is equipped with a robust stainless steel build and sleek finish, offering both durability and style.

The D9412G also boasts Bosch's innovative AutoCook technology, which automatically adjusts cooking times and temperatures based on the selected dish. This feature not only simplifies meal preparation but also ensures consistent results every time. Additionally, the model includes a built-in sensor that monitors food moisture levels, making it easier to achieve perfectly cooked meals without constant supervision.

In contrast, the Bosch D7412G caters to users seeking a balance of practicality and modern design. It maintains many of the advanced features of the D9412G while being more compact, making it ideal for smaller kitchens. The D7412G also utilizes the dual-fan system, ensuring that cooking is quick and even, with reduced energy consumption.

Both models are equipped with Bosch’s EcoSilent motor, which provides powerful performance while maintaining whisper-quiet operation. This is particularly beneficial for open-concept living spaces where noise levels matter. Additionally, both appliances come with a variety of cooking modes, including convection baking, broiling, and roasting, offering users versatility in their culinary endeavors.

The Bosch D9412G and D7412G also focus on user experience, with intuitive controls and easy-to-read displays that allow for effortless navigation. Their self-cleaning features save time and effort, ensuring that maintaining a clean appliance is straightforward.

In summary, Bosch's D9412G and D7412G models epitomize modern appliances that seamlessly blend technology and design with high-performance cooking capabilities. Whether you choose the high-capacity D9412G or the space-saving D7412G, you can expect exceptional results in your culinary endeavors, backed by Bosch's reliable engineering and quality.