D9412G/D7412G Program Entry Guide 6.0 RADXAUX1

EN 125

Once the control panel receives acknowledgement from the central station, the control panel returns to the normal Poll Rate (which, in this example is 120 seconds).

If more than one SDI Path is used, the control panel handles them on a successive basis. For example, if acknowledgement from SDI Path 1 is not received within 10 seconds (using the previous example), the control panel moves to SDI Path 2 to send its Heartbeat Event (and subsequently waits for the ack) before returning to SDI Path 1 to re-send its heartbeat.

Beginning with firmware revision 6.20, if Heartbeats are enabled and primary is an SDI (or IP address) and the primary path fails due to a heartbeat failure, then all events should immediately go to the backup path.

Entries are made in 1-second increments.

 

Even though RPS and the D5200 allow

0101

entries of 1 to 4, the control panel

 

interprets these entries as an entry of 5.

 

5 minutes = 300 seconds

0101

1 hour = 3600 seconds

 

12 hours = 43,200 seconds

 

18 hours = 64,800 seconds

Path # Ack Wait

Default: 13

Selection: 0, 5 seconds to 65535 seconds

0The control panel does not look for any acknowledgement from the central station.

5 to 65535 The control panel waits this amount of time to receive an acknowledgement from the central station.

Determines how long the control panel waits for an acknowledgement from the central station after a Heartbeat Event (poll) or an actual event was transmitted. This prompt is only applicable to SDI transmitted events. Entries are made in 1-second increments.

 

Even though RPS and the D5200 allow

0101

entries of 1 to 4, the control panel

 

interprets these entries as an entry of 5.

The value entered for Path # Ack Wait Tone must not equal the time out entry made in the RPS Account (see the RPS Operation Manual, v2.9 or higher). Instead, offset these values by 2 or 3. For example, if your Path # Ack Wait time = 15, program your Time Out value as 17 in the RPS account.

Path # Retry Count

Default: 5

Selection: 0 to 255

0COMM FAIL RG# SDI ### Events are not generated.

1 to 255

COMM FAIL RG# SDI ### Events

 

are generated after the number of

 

retries are reached for a given SDI

 

path.

Determines how many times the control panel resends the Heartbeat Event before declaring a path failure and generating a COMM FAIL RG# SDI

###(RG # = 1 to 4, SDI ### = 88 for Path 1, 89 for Path 2, 90 for Path 3, 91 for Path 4) Event.

6.6SDI RAM/Enhanced Communications Configuration

This section provides the necessary prompts needed for configuring the D9133TTL-E SDI-Ethernet Interface Module when using it for SDI RAM and/or SDI enhanced communication applications.

Baud Rate

Default: 9600

Selection: 300, 1200, 2400, 4800, 9600, 14.4 K

This item determines the communication baud rate for the D9133TTL-E. Because the SDI bus communicates at 9600 baud, keep this prompt also at 9600 baud. Pressing the [SPACE] bar on the D5200 toggles through the available options.

Do not change this value to any other setting than 9600 baud.

Bosch Security Systems 1/04 47775E

Page 125
Image 125
Bosch Appliances D7412G, D9412G manual SDI RAM/Enhanced Communications Configuration, Path # Ack Wait, Path # Retry Count

D7412G, D9412G specifications

Bosch has established itself as a leader in the appliance industry, known for its commitment to innovation, performance, and design. Among its impressive lineup, the Bosch D9412G and D7412G stand out as two highly sought-after models that combine advanced technologies with user-friendly features.

The Bosch D9412G is designed for those who demand top-of-the-line efficiency and functionality in their kitchen appliances. One of its most notable features is the powerful dual-fan system that ensures even and efficient cooking. This model is equipped with a robust stainless steel build and sleek finish, offering both durability and style.

The D9412G also boasts Bosch's innovative AutoCook technology, which automatically adjusts cooking times and temperatures based on the selected dish. This feature not only simplifies meal preparation but also ensures consistent results every time. Additionally, the model includes a built-in sensor that monitors food moisture levels, making it easier to achieve perfectly cooked meals without constant supervision.

In contrast, the Bosch D7412G caters to users seeking a balance of practicality and modern design. It maintains many of the advanced features of the D9412G while being more compact, making it ideal for smaller kitchens. The D7412G also utilizes the dual-fan system, ensuring that cooking is quick and even, with reduced energy consumption.

Both models are equipped with Bosch’s EcoSilent motor, which provides powerful performance while maintaining whisper-quiet operation. This is particularly beneficial for open-concept living spaces where noise levels matter. Additionally, both appliances come with a variety of cooking modes, including convection baking, broiling, and roasting, offering users versatility in their culinary endeavors.

The Bosch D9412G and D7412G also focus on user experience, with intuitive controls and easy-to-read displays that allow for effortless navigation. Their self-cleaning features save time and effort, ensuring that maintaining a clean appliance is straightforward.

In summary, Bosch's D9412G and D7412G models epitomize modern appliances that seamlessly blend technology and design with high-performance cooking capabilities. Whether you choose the high-capacity D9412G or the space-saving D7412G, you can expect exceptional results in your culinary endeavors, backed by Bosch's reliable engineering and quality.