Bosch Appliances D9412G, D7412G manual Product Handlers, Programming Options

D9412G/D7412G Program Entry Guide 1.0 Introduction

EN 8

1.5Product Handlers

Programming the 9000 Series requires multiple product handlers. The availability of each handler is indicated in Table 4. See the control panel specific Release Notes to determine the most up-to-date handler versions.

Although the handlers shown in Table 4 can be used to program any of the new control panels, not all of the functions operate. For example, the RADXUSR1 Handler is used to program users 000 through 124. Even though the handler allows you to program users 100 through 124, the D7412G does not allow the activation of these users.

Table 4: Product Handlers

Product Handler	Function
9000MAIN	Covers Panel-Wide, Area, Command Center Function List, User
	Interface, and Relay programming modules.
RADXUSR1	Covers Passcode/Token programming for Users 000 through 124
	(99 users for the D7412G).
RADXUSR2	Covers Passcode/Token programming for Users 125 through 249.
RADXPNTS	Covers Point Index and Point Assignment programming for all points.
RADXSKED	Covers Open/Close Windows, User Access Windows, Skeds, and
	Holiday Index programming modules.
RADXAUX1	Covers SDI Automation, SDI RAM Parameters, Enhanced
	Communication Parameters, Route Group Attempts, Miscellaneous,
	and Cross Point Parameters.
RADXAXS	Covers the programming parameters for installed D9210B Door
	Controllers. The Program Entry Guide and Program Record Sheet for
	this handler comes with the D9210B Access Control Module.

D9412G D7412G

￿ ￿

￿ ￿

￿N/A

￿￿

￿￿

￿￿

￿￿

1.6Programming Options

This Program Entry Guide is set up in a specific order. Related program entries are grouped together in modules as they appear in the specific product handlers. The handler and the programming module are listed at the top of each page to help you find specific programming prompts.

This Program Entry Guide shows the programming options for each product handler. Each option is listed with:

•The Program Item Prompt: Each prompt is shown, as it appears in the D5200 Programmer [see the D5200 Programmer Operations Manual (P/N: 74-06176-000)] or the Remote Account Manager [see the RPS Operations Manual (P/N: 38849)]. Sometimes, for space considerations, a prompt must be abbreviated in the Programmer display. In these cases, the meaning of the prompt is explained below the prompt

•Program Entry Default Setting: Because defaults are set for the typical installation, you may not need to program each prompt. Review the default entries in the Program Record Sheet

shipped with the control panel to determine which prompts must be programmed.

•Program Entry Selections: Only the selections listed can be used for a particular program item. The programmer does not accept inappropriate entries.

•Program Entry Description: Provides concise information regarding what can occur with the various entry selections. Read the descriptions carefully to avoid improperly programmed equipment.

•Custom Programming: A new feature of the D5200 Programmer is the option to select custom programming (Yes or No) to expand programming modules within the D5200. Programming Custom as Yes does not affect a parameter’s programming. It allows parameters for special applications to be visible in the programmer.

Bosch Security Systems 1/04 47775E