Bosch Appliances D9412G, D7412G manual RAM Reports, Point Reports

D9412G/D7412G Program Entry Guide 2.0 9000MAIN

EN 22

RAM Reports

Selecting Yes enables sending a report when the RAM Passcode Event occurs.

RAM Access Fail can indicate a wrong RAM passcode when communicating with the control panel, or a valid RAM session was terminated by a means other than a Good-bye or Reset- bye command. Remote Reset indicates a Reset-bye command issued from RAM, Bad Call to RAM indicates the control panel called RAM but was unable to connect.

Table 16: RAM Reports

Report	Selection	Description
	s
R# Log	Yes, No	Reports Event log
Threshold		threshold reached.
R# Log	Yes, No	Reports Log is full,
Overflow		old events are
		overwritten.
R# Para	Yes, No	Reports RAM
Changed		Parameter Change
		Event.
R# RAM OK	Yes, No	Reports Successful
		RAM Access Event.
R# RAM Fail	Yes, No	Reports Failed
		Access RAM Event.
R# Remote	Yes, No	Reports Remote
Reset		Reset Event.
R# Program	Yes, No	Reports Successful
OK		Laptop Access
		Event.
R# Program	Yes, No	Reports Failed
Fail		Laptop Access
		Event.

Point Reports

Selecting Yes enables a report to be sent when the event occurs.

Table 17: Point Reports

Report	Selections	Description
R# Service	Yes, No	Reports Service
Start		Walk Test Start
		Event.
R# Service End	Yes, No	Reports Service
		Walk Test End
		Event.
R# Fire Walk St	Yes, No	Reports Fire Walk
		Start event.
R# Fire Walk	Yes, No	Reports Fire Walk
End		End Event.
R# Walk Test	Yes, No	Reports Walk Test
St		Start Event for Walk
		Test and Invisible
		Walk Test.
R# Walk Test	Yes, No	Reports Walk Test
End		End Event for Walk
		Test and Invisible
		Walk Test.
R# Extra Point	Yes, No	Reports Extra Point
		Event.
R# Send Point	Yes, No	Reports point text.
Text*
R# RF Low Bat	Yes, No	Reports low battery
		conditions for RF
		points.
R# RF Low Bat	Yes, No	Reports low battery
Res		restoral conditions
		for RF points.

*Point text is always transmitted when using NetCom applications.

Bosch Security Systems 1/04 47775E