Bosch Power Tools 2000 manual About This Manual, E Version Control Panels, En

2000 Series Program Entry Guide About This Manual

About This Manual

This guide describes the programming parameters available to the 2000 Series Control Panels (except D2012/D2012U). This guide follows the organization of the D2212 Product Handler in the D5200 Programmer.

The table of contents lists each programming section, program item, and its page number.

Throughout this manual, programming prompts are shown in bold italic letters (such as

Phone 1).

Use the Program Record Sheet (P/N: 35113) to record your program entries. Installation instructions can be found in the panel’s Installation Guide. The Keypad Diagnostics Sheet provides specific diagnostic and testing information. A Security System User Guide comes with the keypad.

E Version Control Panels

The E versions of the 2000 Series Control Panels (for example, the D2412UE) do not include point expansion. They are limited to the on-board points.

Any programming for point expanders does not apply to E version control panels.

Using this Guide for Keypad Programming

Keypad programming requires a text keypad. For an explanation, refer to Section 18.0 Keypad Programming of this manual.

Display text and keypad programming appear as shown:

0000

0 to 9, B to F

Default entries and selections for keypad programming also appear in shaded boxes.

Bosch Security Systems 7/05 35114F

EN 2