Bosch Power Tools 2000 manual the Parameter prompt, Series Program Entry Guide, Relays

2000 Series Program Entry Guide 13.0 Relays

EN 54

Table 18: Relay Function Selections

Programmers	Keypad	Description
No Output	0	No output at the relay terminal.
Alarm	1	Provides a steady output when a point is in an alarm condition.
		The relay output follows Bell Time.
		Note:
		This output does not occur for alarms caused by A, B, C Keys.
		Entering a combination to acknowledge an alarm resets the relay.
		Select the points to monitor for alarms at the Parameter prompt.
Alarm Memory	2	Provides a steady output when a point shows alarm memory at the keypad.
		Turning the system on clears alarm memory and ends the output. This output
		does not occur for alarms caused by A, B, C Keys.
		Select the points to monitor for alarm memory at the Parameter prompt.
Point Trouble	3	Provides a steady output when selected points are in trouble.
		Select the points to monitor for troubles at the Parameter prompt. Swinger
		bypass is a point trouble and activates the Point Trouble Relay function.
Follow Point	4	Provides a steady output when selected points are faulted (including point trouble
		and alarm).
		Select the points to monitor for faults at the Parameter prompt.
Watch Tone	5	Activates the relay output in parallel to the watch tone for selected points. Refer to
		Key 7, Watch Tone in the User’s Guide. If you set the watch tone to No Tone, the
		Watch Tone relay does not activate. Select the points for Watch Tone monitor at
		the Parameter prompt.
A,B,C Key, Steady	6	Activates the relay output when a user presses a selected function key. The relay
		output remains activated until a user performs a System Reset (presses [3] and
		enters a passcode).
		Select the function keys to monitor at the Parameter prompt.
A,B,C Key, Pulse	7	Activates the relay output when a user presses a selected function key. The relay
		output pulses until a user performs a System Reset (presses [3] and enters a
		passcode).
		Select the function keys to monitor at the Parameter prompt.

Bosch Security Systems 7/05 35114F