Bosch Power Tools 2000 manual 18.3Modify Mode, 18.4Scroll Lists, 18.5Yes and No Entries

2000 Series Program Entry Guide 18.0 Keypad Programming

EN 66

18.3Modify Mode

In Modify Mode you can modify the entry for any prompt. Pressing the [A] key in View Mode puts the system in Modify Mode. MOD (short for modify) appears to the right of the group and prompt numbers. Refer to Figure 3.

Figure 3: Modify Mode

1.1MOD

B

The current entry for the prompt is cleared from line 2 of the display. The first character of the scroll list appears in the leftmost position of the display. Using the scroll list to complete the new entry is described in Section 18.4 Scroll Lists. Refer to Table 21.

0101	Even though the current value of the prompt
0101	was cleared when you entered Modify
0101
	Mode, you can leave Modify Mode and
	return to View Mode without changing the
	entry by pressing the [CLEAR] key.

Table 21: Modify Mode Keys

A-	Pressing the [A] key while in View Mode enters Modify Mode. Pressing the [A] key while in Modify Mode
Key	writes the displayed value to control panel memory and returns to View Mode. The display shows the new
	value. Because the system is no longer in Modify Mode, MOD no longer appears to the right of the group and
	prompt numbers.
B-	Pressing the [B] key in Modify Mode scrolls backward through the scroll list of characters. Refer to Section
Key	18.4 Scroll Lists.
C-	Pressing the [C] key in Modify Mode scrolls forward through the scroll list of characters. Refer to Section
Key	18.4 Scroll Lists.
*-Key	Pressing the [*] key in Modify Mode accepts the character displayed in the current character position and
	then moves one character position to the right.
	Do not press the [*] key unless you intend to enter another character to the right of the current character
	position.
	If your entry is complete, press the [A] key to accept your entry.
Clear	Pressing the [CLEAR] key in Modify Mode exits Modify Mode and returns to View Mode with out changing
	the current value of the prompt.
0 to	Pressing the [0] to [9] keys in Modify Mode enters the corresponding digit in the display in the current

9character position. You must press the [*] key to move to the next character position.

18.4Scroll Lists

Alphabetic characters are valid entries for many prompts. Scroll lists allow you to enter alphabetic and other special characters without entering numeric codes for these non-numeric characters.

When you press the [A] key to move to Modify Mode from View Mode, the system erases the current value of the prompt from the display, adds MOD to the right of the group and prompt numbers in the top line of the display, and displays the first character of the scroll list in the leftmost character position of the bottom line of the display.

Scroll lists display allowable alphabetic characters (A to Z) first, then the allowable numeric characters (0 to 9), then the special characters (! # ‘ , - / : < >), and finally the “space” character.

The [C] key moves forward through the scroll list. The [B] key moves backward through the scroll list.

18.5Yes and No Entries

In View Mode the system spells out YES or NO for Yes/No prompts. When you enter Modify Mode the system always displays N for no. Pressing either the [B] key or [C] key toggles Y for yes into the display.

Bosch Security Systems 7/05 35114F