Bosch Power Tools 2000 manual Sys Res Group, Duress Group, Test Group, Series Program Entry Guide

2000 Series Program Entry Guide 4.0 Receiver

10 Sys Res Group

Default: 0

Selection: 0 to 9, B to F

1Successful connection to a remote programmer.

2Not used.

3Control panel reset with the stand-by switch (refer to the Installation Guide) or a remote programmer.

4Not used.

5 Not used.

6 Not used.

7 Reports missing or low battery restored.

8 Restored AC power.

9 Communication Restoral event for Phone 1.

B Communication Failure event for Phone 2.

C RF tamper restore (points or receiver).

D RF battery restore.

E RF receiver 7 restoral.

F RF receiver 8 restoral.

11 Duress Group

Default:	0
Selection:	0 to 9, B to F
1 to 3	Not used.
4	This report transmitted after six
	attempts to enter an invalid passcode.
5	Duress passcode entered at keypad.
	Refer to Code 8 = Duress in Section
	15.0 Passcodes.
7, 8	Not used.

12 Test Group

Default:	0
Selection:	0 to 9, B to F
1 to 5	Not used.
6	Service stop.
7	Service start.
8	Test Report.

Bosch Security Systems 7/05 35114F

EN 20