Brother BAS-311H 4-6.Starting up, 4. PREPARATION BEFORE SEWING, needle bar is at the needle up stop position, Before turning on the power switch, check that the

4. PREPARATION BEFORE SEWING

4-6. Starting up

2979B	Before turning on the power switch, check that the
	needle bar is at the needle up stop position.
	Turn the pulley (1) in the direction of the arrow until the
	ridge at the bottom of the thread take-up (2) is aligned with
	the index mark.

Aligned

3068B

	1. Turn on the power switch.
		The POWER indicator (3) will illuminate, and the model
		name will appear in the tension value display (4) and the
		specifications will appear in the section No. display (5).
		Specifications			Display
		Medium-weight
		materials	－03S
		Motor-driven work
		clamp
		Medium-weight
		materials	－03A
		Pneumatic work
		clamp
		Heavy-weight
		materials	－05S
		Motor-driven work
		clamp
		Heavy-weight
		materials	－05A
		Pneumatic work
		clamp
		Seatbelts	－07A
3349B			3151B	3152B	3153B	3154B	3155B

After this, if there is any sewing data registered, the program number will flash in the PROGRAM No. display

(6). However, no sewing data is recorded at the time of shipment from the factory, and so "---" will appear at this time.

For details on the sewing data reading method, refer to "7. Using SD cards".

27 BAS-311H