6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

<Method of use>

When a cycle program has been recorded, the cycle program number is displayed after the program number when a program number is selected.

Program parameter for step 1

1.Press the or key (1) to select the cycle program number that you would like to use.

・The cycle program number is displayed in the PROGRAM No. display, the step number is displayed in the TENSION display, and the parameter for that step is displayed in the menu display (2).

・When you press the SELECT key, the menu display (2) and the menu indicator (3) are switched, so that you can check the program parameters for that step.

Step No.

3105B

2. Carry out sewing while referring to “8. Sewing”.

・ The recorded programs are carried out in the order of the steps, and when the last step is completed, sewing returns to the first step.

・ If you press the or key, you can return to the previous step or skip to the next step respectively. (You do not need to carry out home position detection again.)

3106B

2382B 2383B

* When memory switch No. 405 is set to OFF, the display of cycle programs can be turned off (skipped).

45

BAS-311H