
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
(12) SPLIT No. indicatorIlluminates when the SELECT key (14) is pressed to show the split setting when split data (for specifying a pause while the program is running) exists.
(13) WIPER indicatorIlluminates when the SELECT key (14) is pressed to switch to the thread wiper.
(14) SELECT keyUsed to select the desired menu (horizontal and vertical scale, sewing speed, counter, (split No.), thread wiping).
(15) PROGRAM No. displayShows information such as program numbers.
(16) Menu displayDisplays information such as menu setting values, memory switch settings and error codes.
(17) Setting keys
Used to change the value which is displayed in the PROGRAM No. display (15).
(18) Setting keys
Used to change the value which is displayed in the menu display (16).
(19)TENSION key Not used.(20)TENSION indicator Not used.(21)SECTION No. display Not used.(22)TENSION displayShows the program number when copying programs and using SD cards.
(23)Setting keys [+,

Used to accept the values which are displayed in places such as the menu display (16).
(26) Function keys [F1, F2, F3, F4]Used to directly select program numbers and cycle program numbers.
29 |