8. SEWING
WARNING
Do not allow any liquids to get onto this sewing machine, otherwise fire, electric shocks or operating problems may occur.
If any liquid gets inside the sewing machine (machine head or control box), immediately turn off the power and disconnect the power plug from the electrical outlet, and then contact the place of purchase or a qualified technician.
CAUTION
Turn off the power switch at the following times.
If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result.
•When threading the needle
•When replacing the bobbin and needle
•When not using the machine and when leaving the machine unattended
Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine.
3109B
1st step 2nd step
4441Q
4979Q
3110B
1.Turn on the power switch.
2.Press the 
or 
key (1) to select the sewing program number that you would like to use.
*Refer to
3.Depress the foot switch to the 2nd step.
(If using a
(3) before depressing the start switch (2).)
• The feed mechanism will move to the home position.
4.Place the material under the work clamp (3).
5.Depress the foot switch to the 1st step.
(If using a
• The work clamp will be lowered.
6.Depress the foot switch to the 2nd step.
(If using a
(2).)
• The sewing machine will start sewing.
7.After sewing is completed, the thread trimmer will operate, and then the work clamp (3) will be raised.
Use a work clamp which will hold the material securely so that it does not slip. If the material slips when using the standard work clamp and feed plate, process them so that the material does not slip.
51 |