Brother BAS-311H When the setting value for memory, switch No. 003 is “2”, 5-5.Setting the work clamp lift amount, NOTE:, 2 Motor-drivenwork clamp specifications only

5. USING THE OPERATION PANEL (BASIC OPERATIONS)

5-5. Setting the work clamp lift amount

The settings for the work clamp and intermediate work clamp lift amount can be changed using the operation panel.

* For pneumatic work clamp specifications, only threading mode and intermittent presser foot height setting mode will be available.

1	All indicators switch off	Press the THREAD/CLAMP key.
		The sewing machine will switch to threading mode.
		• " 1" will appear in the PROGRAM No. display, and the work
		clamp will be lowered.

THREAD/CLAMP indicator illuminates	3088B
MENU indicator switches off
2 Motor-driven work clamp specifications only	Press the key.
	The sewing machine will switch to work clamp height setting mode.

•" 2" will appear in the PROGRAM No. display, and the work clamp will be raised to the setting value which appears in the menu display.

(Work clamp height setting: 15 − 25)

Press the or key to set the work clamp height.

• The work clamp will be raised or lowered to the height of the
•	setting value.
	If you press the or key to change the height, the height
	display will flash.
•	If you press the RESET key while the height display is flashing,
	the setting value will return to the value before the change was
•	made.	3089B 2414B
	Press the ENTER key to accept the setting.

When the setting value for memory	Press the		key.
switch No. 003 is “2”	The sewing machine will switch to intermediate work clamp
	height setting mode.
	•	" 3" will appear in the PROGRAM No. display, and the work
		clamp will move to the setting value that appears in the menu
		display.
		(Intermediate work clamp height setting: 1 − 15)
	Press the		or	key	to set the intermediate	work clamp
	height.
	•	The work clamp will be raised or lowered to the height of the
	•	setting value.
		If you press the		or	key to change the intermediate work
		clamp height, the height display will flash.
	•	If you press the RESET key while the height display is flashing,
		the setting value will return to the value before the change was
	•	made.				3090B
		Press the ENTER key to accept the setting.

NOTE:

When setting the work clamp height and the intermediate presser foot work clamp height, check that the slider (1) is touching the work clamp lifter plate assembly (2).

3091B

BAS-311H 38