1 | Change the mode to memory switch setting mode. | While pressing the TEST key, press the TENSION key. | ||||
| All indicators switch off |
|
|
|
|
|
|
| ・ The memory switch number will appear in the | ||||
|
| PROGRAM No. display, and the setting value for that | ||||
|
| memory switch number will appear in the menu display. | ||||
| Menu indicator switches off, TEST indicator flashes |
|
|
| 3094B | 2421B |
|
|
|
|
|
| |
2 | Select the memory switch that you would like to change | Press the | or | key to | select the memory | switch |
| the setting for. | number. |
|
|
|
|
|
|
|
|
|
| 3095B |
| If you would like to display only the numbers of | While pressing the SELECT key, press the or | key | |||
| memory switches that have been changed from default | (1). |
|
|
|
|
| settings | ・ The numbers of memory switches that have been | ||||
|
| changed from default settings will appear in order. |
| |||
|
|
|
|
|
| 2423B |
|
|
|
|
|
| |
3 | Change the memory switch parameters. | Press the | or | key to change the setting value. |
| |
|
| ・ The flashing display means that the setting has not yet been | ||||
|
| applied. |
|
|
|
|
|
| ・ You can make the initial setting appear in the display by | ||||
|
| pressing the RESET key. |
| 3096B | ||
4 | Apply the changed parameter setting. | Press the ENTER key. |
|
| ||
|
| ・ The menu display will change from flashing to | ||||
|
| illuminated, and this means that the setting has been | ||||
|
| applied. |
|
|
| |
|
| ・ If you | press | the or | key (1) or the TEST key | |
| 2414B | without pressing the ENTER key, you can cancel the | ||||
| parameter changes. |
|
| |||
5 | Repeat steps 2 to 4 above to set each memory switch. |
|
|
|
|
|
|
|
|
|
| ||
6 | Exit setting mode. | Press the TEST key. |
|
| ||
|
| ・ The changes will be memorized and the sewing | ||||
|
| machine will switch to home position detection standby. | ||||
| TEST indicator switches off |
|
|
|
| 2404B |
40 |