
11. LIST OF ERROR CODES
FeedCode | Cause of error and remedy | |
| ||
E200 | connection. | |
Turn off the power, and then check that connectors P17, P21 and P8 on the main P.C. board are properly | ||
| ||
| connected. | |
E201 | ||
Turn off the power, and then check if there are any problems in the | ||
| Turn off the power, and then check that connectors P17 and P21 on the main P.C. board are properly connected. | |
E204 | ||
Turn off the power, and then check if there are any problems in the | ||
| Turn off the power, and then check that connectors P17 and P21 on the main P.C. board are properly connected. | |
E205 | ||
Turn off the power, and then check if there are any problems in the | ||
| Turn off the power, and then check that connectors P17 and P21 on the main P.C. board are properly connected. | |
| ||
E206 | Turn off the power, and then check if there are any problems in the | |
| Turn off the power, and then check that connectors P17 and P21 on the main P.C. board are properly connected. | |
| ||
E210 | connection. | |
Turn off the power, and then check that connectors P18, P22 and P8 on the main P.C. board are properly | ||
| ||
| connected. | |
| ||
E211 | Turn off the power, and then check if there are any problems in the | |
| Turn off the power, and then check that connectors P18 and P22 on the main P.C. board are properly connected. | |
| ||
E214 | Turn off the power, and then check if there are any problems in the | |
| Turn off the power, and then check that connectors P18 and P22 on the main P.C. board are properly connected. | |
| ||
E215 | Turn off the power, and then check if there are any problems in the | |
| Turn off the power, and then check that connectors P18 and P22 on the main P.C. board are properly connected. | |
E216 | ||
Turn off the power, and then check if there are any problems in the | ||
| Turn off the power, and then check that connectors P18 and P22 on the main P.C. board are properly connected. | |
E230 | Feed motor stopped due to a problem. | |
Reduce the sewing speed or change the operation settings to the settings for | ||
| Ask the place of purchase for details on the setting method. |
72 |