5. USING THE OPERATION PANEL (BASIC OPERATIONS)

5-2-4. Split number setting method

Pattern 1

Pattern 2

Pattern 3

4964Q

If split data (data that causes sewing to pause) exists within a single program, the numbers that are used to specify the patterns that are separated by split data are called split numbers.

Pattern 1: Split No. 1

Pattern 2: Split No. 2

Pattern 3: Split No. 3

1.Press the or key (1) to select a program number for a program that contains split data.

•The program number will flash in the PROGRAM No. display (2).

2.Depress the foot switch to the 2nd step.

(If using a two-pedal foot switch, lower the work clamp before depressing the start switch.)

•The feed mechanism will move to the home position and the program number will be accepted.

•The program number will stop flashing and illuminate steadily.

3.Press the SELECT key (3) so that the SPLIT No. indicator

(4) illuminates.

•The split number will appear in the menu display (5).

4.Press the or key (6) to set the split number.

2nd step

3083B

The setting for memory switch No. 403 lets you select the split mode.

[Continuous split]

Memory switch No. 403 = 0 (Split mode is always enabled)

•Sewing is carried out each time in the order of steps 1 → 2 → 3 → 1 (for example, if there are two sections of split data).

[Independent split] Memory switch No. 403 = 1

•The pattern for the displayed split number is sewn independently.

35

BAS-311H