7. USING SD CARDS

 

 

 

 

 

 

 

 

7-4. Reading additional sewing data

 

 

 

 

 

 

 

 

 

 

1

 

 

Select the “ r 1” SD data read/write mode.

 

 

 

 

 

(Refer to “7-3. Preparation for reading and writing data”.)

 

 

 

 

 

・ The number of the additional sewing data in the SD

 

 

 

 

 

memory card folder will appear in the tension display.

 

 

 

 

 

(The initial value displayed is “ALL”.)

 

 

 

 

3098B

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

Press the

or

key to select the number for the

 

 

 

 

 

 

 

 

 

 

additional sewing data that you would like to be read

 

 

 

 

 

(ALL, 100 to 999).

 

 

 

 

 

 

・ When “ALL” is displayed, all of the additional sewing

 

 

 

 

 

data will be read at once.

 

 

 

For example, if the additional sewing

 

・ Only the data in the SD card folder corresponding to

 

 

 

data to be read is for program No. 100

 

the additional sewing data number will be displayed. (If

 

 

 

 

 

there is not a single item of data in the folder, “---“ will

 

 

 

 

3099B

be displayed.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

Press the ENTER key.

 

 

 

 

 

 

 

 

2414B

 

 

 

 

 

・ The buzzer will sound and the selected additional

 

 

 

While reading

 

sewing data will be read from the SD card and copied

 

 

 

 

into the sewing machine's internal memory.

 

 

 

 

 

 

 

 

The number for the additional

・ If no additional sewing data exists, an error buzzer will

 

 

 

sound.

 

 

 

 

 

sewing data number which is

 

 

 

 

 

 

 

 

 

 

 

currently being read will appear in

 

 

 

 

 

 

the tension value display.

 

 

 

 

 

 

 

2657B

3100B

 

 

 

 

 

 

 

 

 

 

 

4

 

 

When the display returns to the status in step 1, reading

 

 

 

 

 

of the additional sewing data is complete.

 

 

 

 

 

・ If you would like to use any other read/write modes,

 

 

 

 

 

press the

or

key to select the mode and then

 

 

 

 

 

run it.

 

 

 

 

 

 

3101B

 

 

 

 

 

 

 

 

 

 

 

 

5

Ending read/write mode

 

Press the TEST key.

 

 

 

 

TEST indicator switches off

 

 

 

 

 

 

 

 

2404B

 

 

 

 

 

 

 

 

 

 

 

 

* Contact the place of purchase for information on other reading and writing modes.

BAS-311H

50