
11. LIST OF ERROR CODES
WorkCode | Cause of error and remedy | |
| Work clamp home position cannot be detected. Problem with work clamp motor or poor work clamp home | |
E300 | position sensor connection. | |
Turn off the power, and then check that connectors P19, P23 and P8 on the main P.C. board are properly | ||
| ||
| connected. | |
E301 | Work clamp raised or lowered position cannot be detected. | |
Turn off the power, and then check if there are any problems in the work clamp vertical direction. Turn off the | ||
| power, and then check that connectors P19 and P23 on the main P.C. board are properly connected. |
73 |