
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
If the sewing machine stops operating normally, the cause may be that an incorrect setting may have been made for the memory data by means of memory switches, for instance. In such cases, it may be possible to restore normal operation by following the steps given below to initialize the memory setting data.
1 Change to initialization mode. | 3107B |
(While pressing the RESET key, press the power ON | ‘1’ will be displayed in the PROGRAM No. display, and ‘ALL’ will |
switch.) | be displayed in the menu display. |
If the or
key (1) is pressed at this time, you can select the items to be initialized as shown below.
* For details on initialization items other than “ALL”, contact the place of purchase.
PROGRAM | Main display | Initialization item | |
No. display | |||
|
|
1「ALL」 All data in memory is cleared or initialized.
2「MEM」 Memory switch settings are initialized.
3 | 「SEW」 | All sewing programs or individual programs | |
are cleared. | |||
|
| ||
| 「USE」 | User program sewing conditions are | |
4 | initialized. | ||
|
| Cycle programs are initialized. |
*To clear individual programs, press the or
key to select the program number.
| 3108B | 2382B | 2383B | |
|
|
|
|
|
2 | Press the ENTER key for two seconds or more. |
|
|
|
| • The menu display will change to illuminated and initialization will then be |
|
| |
| complete. |
|
|
|
2414B
3 | Press the TEST key. |
2404B
47 |