Preparing to send a document
Beforeyou send a document please refer to:
Typesof documents you can scan, p. 48.
Loadingthe document, p. 49.
Addingpages to the document, p. 50.
Settingthe resolution and density, p. 51.

Sending methods

jDirect Sending (See p. 57)

Ifyour document has a large number of pages, you may sometimes get a MEMORY FULL error if you
areusing Memory Sending. To avoid this, use Direct Sending.
Tosend directly, load the document, dial the fax number and press [START/COPY].

jManual Sending (See p. 57)

Ifyou would like to speak with the other party before sending a fax to them, use Manual Sending.
Whensending manually, you dial, converse normally and then press [START/COPY] to begin sending.
Formanual sending, you need to have the optional handset or an extension phone connected.

jMemory Sending (See p. 59)

Ifyou do not want to wait for your document to be scanned page by page during sending (Direct
Sending),use Memory Sending. Memory Sending scans the document into memory, then dials and
sendsthe stored image, letting you take away the original immediately after scanning.

Dialling methods

Thereare several methods of dialling the receiving party’s number, depending on how your fax is set up.
ManualDialling:
Dialthe recipient’s fax number using the numeric buttons.
One-touchSpeed Dialling:
Diala recipient’s fax number that has been assigned to a One-touch Speed Dialling button by simply
pressingthe corresponding One-touch Speed Dialling button (see p. 58).
CodedSpeed Dialling:
Diala recipient’s fax number that has been assigned to a Coded Speed Dialling code by pressing
[CODEDDIAL] and the 2-digit code assigned to the number (see p. 58).
56