Thefax beeps once to indicate that the document has been sent successfully.
Ifan error occurs during sending, the fax beeps intermittently for a few seconds. If this happens, try
sendingthe fax again.
Thefax automatically redials if the receiving fax does not answer or if the line is busy. (You can
specifythe number of times it redials; see AUTO REDIAL in TX SETTINGS, p. 85.)
Tostop sending before the fax is finished, press [STOP]. You may then need to lift the operation
panelto remove the document, see Clearing document jams, p. 62.
Ifan error message appears on the LCD, correct the error and then press [STOP]. Refer to Error
codes,messages and solutions, p. 110.

Automatic Dialling

jSending a document using One-touch Speed Dialling or Coded

Speed Dialling

Afterregistering the One-touch numbers or Coded Speed Dialling numbers you can send documents as
follows:
1Feedthe document face-down into the
AutomaticDocument Feeder (ADF).
SeeLoading the document, p. 49. You can set the
resolutionand the density, p. 51.
2Pressthe One-touch Speed dialling button
assignedto the number to which you wish to
fax.
or
Press[CODED DIAL] and enter the appropriate
two-digitCoded Speed Dialling code.
Waita second for the number to appear after the
nameof the number.
Ifno number is registered for the button or
codeyou pressed, the LCD display shows the
NOTEL# message. Make sure you pressed the
correctbutton or entered the correct code and
thatthe number you want to dial is registered
correctly.
Ifyou make a mistake, press [STOP]. Then
pressthe correct One-Touch Speed Dialling
buttonor press [CODED DIAL] and re-enter
thecode
Ifan error message appears on the LCD, correct
theerror and press [STOP]. If necessary, refer to
FrequentlyAsked Questions, p. 104.
TRANSMITTING OK
FINE
CANON USA
12345678999
1sec.
CANON CANADA
2345678999
1sec.
CODEDDIAL
SENDINGFAXES
58