Canon B150 manual Incoming call, It receives a call, Manual receive mode, Receiving ID

SETTINGS

TX SETTINGS

Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 81, 82.

Name	Description	Settings
ECM TX	Enable/disable error correction during transmission.	ON/OFF
MID PAUSE SET	Set the length of the pause you insert into a dialling	2 seconds (1 to 15)*
	sequence.
AUTO REDIAL	Detemine whether the fax will redial a number if it fails to	ON/OFF
	get a response on the ®rst attempt.
REDIAL TIMES	Set the number of retries.	2 times (1 to 10)**
REDIAL INTERVAL	Set the period of time between rediallings.	2 minutes (2 to 60)

*4 seconds (4-11) in the UK and Hong Kong.

**Up to 4 times in the UK and Ireland, and 5 times in New Zealand.

RX SETTINGS

Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 81, 82.

Name	Description	Settings
ECM RX	Enable/disable error correction during reception.	ON/OFF
FAX/TEL SWITCH	Enable/disable FAX/TEL switchover. When ON, this feature
	answers calls, and if no fax tone is detected, the fax rings
	to alert you of an incoming call.

RING START TIME Set the duration that the fax listens for a fax tone before starting to ring.

8 seconds (0 to 30)

F/T RING TIME	Set the length of time the fax will ring to alert you of an	22 seconds (10 to 300)
	incoming call.
F/T SW ACTION	Select the action taken after the F/T RING TIME expires.	DISCONNECT/RECEIVE
INCOMING RING	When the fax is set to Fax Only Mode or Fax/Tel Mode and	ON/OFF
	an extension phone is connected, set the fax to ring when
	it receives a call.
RING COUNT	Set the number of incoming rings before the fax answers.	2 times (1 to 99)
MAN/AUTO SWITCH	Determine if the fax switches to document receive mode	ON/OFF
	after the fax rings for a speci®ed time when the fax is in the
	manual receive mode.

RING TIME	Set the amount of time the fax will ring before switching to
	document receive mode.

10 seconds (1 to 99)

REMOTE RX	Allows you to dial the REMOTE RX ID on an extension	ON/OFF
	phone to start receiving a document.
REMOTE RX ID	If you set REMOTE RX ON, you can change the remote	25 (00 to 99, including and #)	7
	receiving ID.
MEMORY RX	Turn on/off memory receiving of a document.	ON/OFF

85