Canon MVX40i, MVX-45i manual List of Messages, Memory Card Related Messages, Message Explanation

List of Messages

Message	Explanation
SET THE TIME ZONE,	You have not set the time zone, date and time. This message	26
DATE AND TIME	appears each time you turn the power on until you set the time
	zone, date and time.
CHANGE THE BATTERY	Battery pack is exhausted. Replace or charge the battery pack.	16
PACK
THE TAPE IS SET FOR	Cassette is protected. Replace the cassette or change the	144
ERASURE PREVENTION	position of the protect switch.
REMOVE THE	Camcorder stopped operating to protect the tape. Unload and	19
CASSETTE	reload the cassette.
CHECK THE INPUT	DV cable or USB cable is not connected, or the connected digital	108
	device is turned off.	130
CONDENSATION HAS	Condensation has been detected in the camcorder.	139
BEEN DETECTED
CONDENSATION HAS	Condensation has been detected in the camcorder. Unload the	139
BEEN DETECTED	cassette.
REMOVE THE
CASSETTE
TAPE END	Tape reached the end. Rewind the tape or replace the cassette.		–
CHECK THE CASSETTE	You attempted to perform audio dubbing on a tape recorded in		–
[WRONG FORMAT]	HDV format.
WRONG FORMAT	You attempted to play back a tape recorded in HDV format.		–
PLAYBACK NOT
POSSIBLE
CHECK THE CASSETTE	You attempted to perform audio dubbing on a tape recorded in a	113
[REC MODE]	mode other than the SP mode.
CHECK THE CASSETTE	You attempted to perform audio dubbing on a tape recorded in 16-	113
[AUDIO MODE]	bit or 12-bit 4-channel sound.
CHECK THE CASSETTE	You attempted to perform audio dubbing on a tape with a blank	113
[BLANK]	section.
HEADS DIRTY, USE	Video heads are dirty. Clean the video heads.	147
CLEANING CASSETTE
COPYRIGHT PROTECTED	You attempted to play back a copyright protected tape.	110
PLAYBACK IS RESTRICTED
COPYRIGHT	You attempted to dub a copyright protected tape. May also appear	110
PROTECTED DUBBING	when an anomalous signal is received during analog line-in
RESTRICTED	recording.
Memory Card Related Messages

Message	Explanation
NO CARD	Memory card not is inserted into the camcorder.	20
THE MEMORY CARD	Close the card cover.	20
COVER IS OPEN
THE CARD IS SET FOR	SD Memory Card is set for erasure prevention. Replace the card	20
ERASURE PREVENTION	or change the position of the protect switch.
NO IMAGES	No images are recorded on the memory card.		–

140