Canon MVX40i Adjusting the Volume, Adjusting the Speaker Volume, Adjusting the Headphones Volume

Adjusting the Volume

When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker. The speaker does not sound when you close the LCD panel. Use headphones when using the viewfinder.

(phones) terminal

SET dial

Speaker

Adjusting the Speaker Volume

CAMERA PLAY (VCR)

CARD CAMERA CARD PLAY

Turn the SET dial up to increase the volume, and down to lower the volume.

• A volume bar appears for 2 seconds.

• You can turn off the volume completely by turning the SET dial down until “OFF ” appears. Turn the SET dial up to increase the volume again.

Adjusting the Headphones Volume

The headphones terminal also serves as AV terminal. Headphones can only be used when “” is displayed on the screen. If not, change the setting following the procedure below.

CAMERA PLAY (VCR)

CARD CAMERA CARD PLAY

MENU

( 70)

VCR SETUP

AV/PHONES ••AV

1. Press the MENU button and select [VCR SETUP]. Select [AV/PHONES ], set it to [PHONES ] and press the MENU button.

2. Turn the SET dial to increase the volume, and down to lower the volume.

The speaker does not sound when “ ” is displayed.

Do not connect headphones unless “ ” is displayed as it produces noise.

You can also adjust the headphones volume during recording.

40