Although the battery pack’s operating temperature range is from 0 °C to 40 °C (32 °F to 104 °F), the optimal range is from 10 °C to 30 °C (56 °F to 86 °F). At cold temperatures, performance will temporarily decline. Warm it in your pocket before use.

Replace the battery pack if the usable time after full charge diminishes substantially at normal temperatures.

About the battery terminal cover

The battery terminal cover has a [ ]-shaped hole. This is useful when you wish to differentiate between charged and uncharged battery packs. For example, with charged battery packs, attach the terminal cover so that the [ ]-shaped hole shows the blue label.

Back side of the

Terminal cover attached

 

 

battery pack

Charged

Uncharged

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cassette

Rewind tapes after use. If the tape becomes slack and damaged, it may cause picture and sound distortion.

Return cassettes in the case and store them upright.

Do not leave the cassette in the camcorder after use.

Do not use spliced tapes or nonstandard cassettes as they may damage the camcorder.

Do not use tapes that have been jammed as video heads may become dirty.

Do not insert anything into the small holes of the cassette, or cover them with cellophane tape.

Handle cassettes with care. Do not drop or subject them to severe impact as this may damage the cassettes.

Rewind tapes from time to time if they are stored for a long time.

With cassettes equipped with a memory function, metal plated terminals may become dirty with use. Clean the terminals with a cotton swab after about 10 times of loading/ unloading. The memory function is not supported by the camcorder.

Protecting Tapes from Accidental Erasure

To protect your recordings from accidental erasure, slide the tab on the cassette to SAVE or ERASE OFF.

If you load a protected cassette in CAMERA mode, the message “THE TAPE IS SET FOR ERASURE PREVENTION” appears for approx. 4 seconds and “” starts flashing. If you wish to record on that cassette, change the position of the tab.

REC

REC

SAVE

SAVE

144

Page 144
Image 144
Canon MVX40i, MVX-45i manual Cassette, About the battery terminal cover, Protecting Tapes from Accidental Erasure