Canon MVX-45i Using the Wireless Controller, Inserting the Battery, Insert the battery holder

Step 5: Using the Wireless Controller

Inserting the Battery

The wireless controller operates with a lithium button battery CR2025.

1. Press the tab in the direction of the arrow and pull out the battery holder.

2. Place the lithium button battery
with the + side facing up.	Tab

3. Insert the battery holder.

E

Preparation

Using the Wireless Controller

Point it at the camcorder’s remote sensor when you press the buttons.

The wireless controller may not work properly when the remote sensor is subjected to strong light sources or direct sunlight.

If the wireless controller does not work, check if the remote sensor is set to [OFF ] ( 74).

When the camcorder cannot be operated with the wireless controller, or when it can only be operated in very close range, replace the battery.

23