Canon MVX40i, MVX-45i manual 142

		Message				Explanation
INK CASSETTE ERROR				There is a problem with the ink cassette.
PAPER AND INK DO				The ink cannot be used with the selected paper type.
NOT MATCH
WASTE TANK FULL				Waste tank is full. Select [CONTINUE] to restart printing. Consult your
				dealer or a Canon Service Center listed in the Contact List provided with
				the printer or the printer manual to replace the waste tank (waste ink
				absorber).
FILE ERROR				You attempted to print an image that was recorded with another
				camcorder, with a different compression, or was edited on a computer.
CANNOT PRINT!				You attempted to print an image that was recorded with another
				camcorder, with a different compression, or was edited on a computer.
COULD NOT PRINT X				You attempted to use the print order settings to print X images that were
IMAGES				recorded with another camcorder, with a different compression or were
				edited on a computer.
SET			PRINT ORDER	You attempted to print an image from the CARD PLAY menu
				[	PRINT] without having set the print order.
	PRINT ORDER			You attempted to set more than 998 still images in the print order.
ERROR
CANNOT TRIM				You attempted to trim an image that was recorded with another
				camcorder.
READJUST TRIMMING				You changed the print style after you set the trimming settings.
PRINTER ERROR				Cancel printing. Turn off the printer and turn it back on. Check the printer
				status. If the error persists, consult your dealer or a Canon Service
				Center listed in the Contact List provided with the printer or the printer
				manual.
PRINT ERROR				Cancel printing, disconnect the USB cable and turn off the printer. After a
				while, turn the printer back on and reconnect the USB cable. Check the
				printer status. If the error persists, consult your dealer or a Canon
				Service Center listed in the Contact List provided with the printer or the
				printer manual.
				When you are printing using the			button, check the print settings.
HARDWARE ERROR				Cancel printing. Turn off the printer and turn it back on. Check the printer
				status. If the printer is equipped with a battery, it might be exhausted. In
				such case, turn off the printer, replace the battery and turn it back on. If
				the error persists, consult your dealer or a Canon Service Center listed in
				the Contact List provided with the printer or the printer manual.
RECHARGE THE				The printer battery is depleted.
PRINTER BATTERY
COMMUNICATION				The printer is experiencing a data transmission error. Cancel printing,
ERROR				disconnect the USB cable and turn off the printer. After a while, turn the
				printer back on and reconnect the USB cable. When you are printing
				using the		button, check the print settings.
				Or, you attempted to print from a memory card that contains a large
				number of images. Reduce the number of images.
CHECK PRINT				The print setting cannot be used for printing with the				button.
SETTINGS
PRINTER IN USE				The printer is in use. Check the printer status.
PRINTER WARMING UP				Printer is warming up. If the message does not disappear after a few
				seconds, check the printer status.
PAPER LEVER ERROR				Paper lever error occurred. Adjust the paper selection lever to the proper
				position.
PRINTER COVER OPEN				Close the printer cover securely.
NO PRINTHEAD				No print head is installed in the printer or print head is defect. Refer to the
				instruction manual of your printer.

142