Canon MVX40i, MVX-45i manual Memory Card Operation, Printing, Editing

Problem			Solution
The tape stops during	When playback pause continues for more than 4 minutes 30				–
playback pause.	seconds during playback or audio dubbing, the camcorder
	shuts off to protect tape and video heads. Playback the tape
	again and press the	/		pause button.

Memory Card Operation

	Problem	Solution
Memory card cannot be		Memory card was not facing the correct direction. Turn the	20
inserted.		memory card over and reinsert it.
Memory card cannot be		Insert a memory card.	20
recorded.
		Memory card is full. Replace the memory card or erase	103
		images.
		Format the memory card.	104
		File number reached maximum value. Set [FILE NOS.] to	72
		[RESET] and insert a new memory card.
		SD Memory Card is protected. Change the position of the	20
		protect switch.
Memory card cannot be		Set the camcorder to CARD PLAY mode.	39
played back.		Insert a memory card.	20
Image cannot be erased.		Image is protected. Cancel the protection.	102
		SD memory card is protected. Change the position of the	20
		protect switch.
“	” flashes red.	Card error occurred. Turn off the camcorder. Remove and	104
		reinsert the memory card. Format the memory card if flashing
		persists.

Printing

Problem		Solution
The printer is not operating	1.	Set the camcorder to CARD PLAY mode.
even though camcorder and	2.	Disconnect and reconnect the USB cable.
printer are correctly	3.	Turn off the printer and turn it back on.
connected.

–

Editing

Problem			Solution
Dubbing via the camcorder’s	Set [AV	DV/	] (MVX45i) or [AV	DV] (MVX40i) to [OFF].	72
DV terminal does not work.
	Wrong signal format. Dubbing may work via the AV terminal.					–
	Refer also to the instruction manual of the connected device.

138