Cisco Systems 4948E-F manual Regulatory Compliance and Safety Information

A P P E N D I X D

Regulatory Compliance and Safety Information

Note Only trained and qualified service personnel (as defined in IEC 60950-1 and AS/NZS 60950) should install, replace, or service the equipment. Install the system in accordance with the U.S. National Electric Code if you are in the United States.

Warning IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

This appendix includes the following sections:

•Translated Safety Warnings, page D-2

•Regulatory Standards Compliance, page D-40

•GR-1089-CORE Issue 3 Documentation Statements, page D-42

•GR-1089-CORE Issue 4 Documentation Statements, page D-42

•European Directives, page D-43

•Statement 6005—California Perchlorate Contamination Prevention Act (Title 22, California Code of Regulations, Chapter 33), page D-43

•EMC Class A Notices and Warnings, page D-44

Tip For additional information about the Cisco Catalyst 4948E and the Catalyst 4948E-F switches (including configuration examples and troubleshooting information), see the documents listed on this page:

http://www.cisco.com/en/US/products/ps6021/tsd_products_support_series_home.html

Catalyst 4948E and Catalyst 4948E-F Switch Installation Guide

OL-21561-02 D-1