IN-3

7-10

RJ-45 to Twinax cable A-3

removing
carrier card 2-3
CT3 feature card	4-2
dial-only feature card		5-3
T1 or E1 feature card		3-3
universal port feature card			5-3
voice feature card	6-3
required tools and equipment			1-3
restrictions

universal port and dial-only feature cards 5-2

voice feature card 6-2

RX MON bantam jack port 7-10

Index

LEDs (table)		7-3
online insertion and removal					3-2
overview	3-1
removing	3-3
RJ-45 to bare wire cable pinouts (table)							A-5
RJ-45-to-BNC cable pinouts (table)						A-3
RJ-45-to-DB-15 cable pinouts (table)						A-2
RJ-45-to-DB-15 null modem cable pinouts (table)								A-2
RJ-45-to-RJ-45 NT cable pinouts (table)							A-4
RJ-45-to-RJ-45 T1 cable pinouts (table)							A-5
RJ-45-to-RJ-45 TE cable pinouts (table)							A-4
RJ-45 to Twinax cable pinouts (table)						A-3
verifying input impedance				3-12
timesaver symbol, meaning of					viii
tips symbol, meaning of			viii
tools required	1-3
troubleshooting		7-1
displaying environment status					7-8
drop and insert mode for the CT3 feature card 7-10
LEDs 7-1
mix of universal port and dial-only feature cards								7-6
mix of voice feature cards with universal port and
dial-only feature cards					7-6
mix of WAN feature cards				7-5
monitoring chassis environment 7-7
network interfaces 7-11
operating temperature			7-7
using bantam jack port			7-10

TX MON, bantam jack port

T1 or E1 feature card

8-port T1 or E1 feature card cable pinouts A-6attaching the 8-port T1 or E1 feature card interface cable

to a bracket	A-8
cable assemblies	A-2

configuring input impedance 3-11installing 3-9

universal port feature card

installing 5-8LEDs (table) 7-5

mixing with dial-only feature card 7-6online insertion and removal 5-3

overview 5-1removing 5-3

Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide

	78-17406-01	IN-3

Cisco Systems AS5400XM, AS5350XM manual IN-3