Chapter 5 Universal Port and Dial-Only Feature Cards
Overview
Figure 5-1 Universal Port or Dial-Only Feature Card
31634
Note The versions of the universal port and dial-only feature cards are identified on the card faceplate. The universal port feature card faceplates are labeled NP-60 or NP-108, depending on the number of calls supported. The dial-only feature card faceplates are labeled DL-60 or DL-108, depending on the number of calls supported.
Restrictions for the Universal Port and Dial-Only Feature Cards
If a dial-only feature card is installed in a chassis with the universal port feature card, only the dial services are supported. Table 5-1describes the behavior of the Cisco AS5350XM and Cisco AS5400XM universal gateways with dial-only feature cards, universal port feature cards, or both types of cards installed in the chassis.
Caution We do not recommend deploying dial-only feature cards in a chassis that supports voice and fax services, because voice or fax calls assigned to the dial-only feature card will fail.
Note For information about mixing voice feature cards with the universal port and dial-only feature cards, see the “Restrictions for the Voice Feature Card” section on page 6-2.
Table 5-1 Features Supported on Universal Port and Dial-Only Feature Cards
Feature Cards Installed | Services Supported |
| |
Only dial-only feature cards installed | Dial services |
| |
Only universal port feature cards installed | Dial, voice, and fax services |
| |
Both universal port and dial-only feature cards | Dial services |
installed | |
| |
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
