Chapter 6 Voice Feature Card

Overview

For configuration details, see the Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide. For information on voice and fax commands, see the Cisco IOS Voice Configuration Library for your Cisco IOS software release at Cisco.com.

You can install a voice feature card in any card slot of the universal gateway chassis. The voice feature card does not require external connections. (See Figure 6-1.)

Figure 6-1 Voice Feature Card

135784

Restrictions for the Voice Feature Card

Voice feature cards are not compatible with universal port and dial-only feature cards. Voice feature cards should not be installed on any system that has universal port and dial-only feature cards. Table 6-2describes the behavior of the Cisco AS5350XM and Cisco AS5400XM universal gateways depending on whether the voice feature card is present at power on.

Table 6-2 Voice Feature Card Support During Power On

Feature Cards Present at Power On

Feature Cards Supported

 

 

Voice feature card present at power on

Voice feature card only. Any universal port and

 

dial-only feature cards present will not be

 

operational until the voice feature card is removed

 

and the system is rebooted.

 

 

Voice feature card not present at power on

Universal port or dial-only feature cards only. Any

 

voice feature card installed later will not be

 

operational until the system is rebooted.

 

 

Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide

6-2

78-17406-01

 

 

Page 64
Image 64
Cisco Systems AS5350XM Restrictions for the Voice Feature Card, Feature Cards Present at Power On Feature Cards Supported