Cisco Systems AS5350XM, AS5400XM manual System Processing Engine Firmware, Getting Help

Chapter 5 Universal Port and Dial-Only Feature Cards

System Processing Engine Firmware

Step 6 Check the card LEDs to verify that the card is working properly. For information about feature card LEDs, see Chapter 7, “Troubleshooting.”

System Processing Engine Firmware

System processing engine (SPE) firmware is automatically downloaded to a universal port or dial-only feature card from the Cisco IOS image when you boot the system for the first time, or when you insert a universal port or dial-only feature card while the system is operating. When you insert feature cards while the system is operating, the Cisco IOS image recognizes the cards and downloads the required firmware to the cards.

For more information on universal port and dial-only feature card firmware and upgrade options, see the Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide.

Getting Help

For information about technical support, onsite service, and exchange and repair services, see the “Obtaining Technical Assistance” section on page xvi.

Where to Go Next

The remaining chapters of this guide include information about installing and troubleshooting feature cards and about building cables.

•Chapter 6, “Voice Feature Card”

•Chapter 7, “Troubleshooting”

•Appendix A, “Cabling Specifications”

Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide

5-10 78-17406-01