Chapter 7 Troubleshooting

Troubleshooting Network Interfaces

Note The port-numberis the T1 circuit that you wish to drop. T1 port numbers range from 1 to 28.

Step 2 Disable drop and insert mode after testing the T1 circuits.

Note We recommend that you disable drop and insert mode to prevent accidental use of the push button on the CT3 feature card.

To disable drop and insert mode, enter the test trunk drop-insert off port-numberprivileged EXEC command as follows:

Router> test trunk drop-insert off port-number

Troubleshooting Network Interfaces

For information about isolating problems with the network connections to your universal gateway, see the Internetwork Troubleshooting Guide publication available on Cisco.com.

Getting Help

For information about technical support, onsite service, and exchange and repair services, see the “Obtaining Technical Assistance” section on page xvi.

Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide

 

78-17406-01

7-11

 

 

 

Page 85
Image 85
Cisco Systems AS5400XM, AS5350XM manual Troubleshooting Network Interfaces, Getting Help