Cisco Systems CL-28826-01 Service Module Credentials Dialog Box

3-18

User Guide for Cisco Security Manager 4.4

OL-28826-01

Chapter 3 Managing the Device Inventory

Adding Devices to the Device Inventory

Service Module Credentials Dialog Box

Use the Service Module Credentials dialog box to add the credentials required to log into supported

service modules in a Catalyst device.

The dialog box includes a group for each slot that contains a supported module, and the type of module

is indicated. For example, a group might be called Slot 3 (IDSM) Credentials, which indicates that there

is an IDSM in the third slot of the chassis.

Note Although Security Manager discovers VPN modules, the discovery is done through the chassis and no

credentials are required. ASA service modules (ASA-SM) cannot be discovered through the chassis; you

must add them individually.

Navigation Path

After you discover policies on a Catalyst chassis that can contain service modules, you are asked if you

want to discover its service modules. If you click Yes , this dialog box appears. You can perform policy

discovery using any of these methods:

•When adding a device from the network. See Adding Devices from the Network, page 3-11.

•When adding devices from an export file. See Adding Devices from an Inventory File, page 3-29.

•When performing policy discovery on a device that is already in the inventory. See Discovering

Policies on Devices Already in Security Manager, page5-15.