65-46
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 65 Managing Cisco Catalyst Switches and Cisco 7600 Series Routers
IDSM Settings
Note Associating one module data port with the VLAN enables you to configure the port at the group
level instead of configuring it manually.
Step 5 From the Mode list, select the running mode of the EtherChannel VLAN. If you select Capture, select
the check box to configure the specified channel group as a capture destination.
Note If you do not select this check box, the capture port is created in shutdown mode.
Step 6 To include a VLAN in the specified channel group, do one of the following:
Enter its numeric ID in the VLAN IDs text box.
Click Select to open the VLAN Selector dialog box.
You can enter or select more than one VLAN ID.
Step 7 Click OK to save your definitions locally on the client and close the dialog box.
Deleting EtherChannel VLAN Definitions
You can delete an EtherChannel VLAN definition on the IDSM.
Related Topics
Creating or Editing EtherChannel VLAN Definitions, page 65-45
Deleting Data Port VLAN Definitions, page 65-48
IDSM Settings, page 65-44
Step 1 Do one of the following:
(Device view) Select a Catalyst device, then select Platform > IDSM Settings from the Policy
selector.
(Policy view) Select Catalyst Platform > IDSM Settings.
The IDSM Settings page is displayed. For a description of the fields on this page, see IDSM Settings
Page, page 65-48.
Step 2 Click a row in the table to select the VLAN definition to delete.
Step 3 Click Delete Row.
Creating or Editing Data Port VLAN Definitions
When defining a data port VLAN definition, you must:
Define the slot-port combination where the data port is located.
Select the sensing mode used by the data port.
Define which VLANs are forwarded to the data port.