65-41
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter6 5 Managing Cisco Catalyst Switches and Cisco 7600 Series Routers
VLAN ACLs (VACLs)
Create and Edit VLAN ACL Dialog Boxes
Use the Create VLAN ACL dialog box (or the Edit VLAN ACL dialog box) to configure or reconfigure
VAC L a tt ri bu te s.
Navigation Path
Go to the VLAN Access Lists Page, page 65-39, then click the Add or Edit button beneath the table.
Related Topics
Create and Edit VLAN Dialog Boxes, page 65-28
Create and Edit VLAN Group Dialog Boxes, page 65-34
Filtering Tables, page1-45
Field Reference
Capture Interfaces Identifies the interface that captures forwarded packets in which the
capture bit is set. You can configure any interface as the capture
interface.
The capture action sets the capture bit for the forwarded packets so that
ports with the capture function enabled can receive the packets. Only
forwarded packets can be captured.
Note The information shown here is read-only. To define capture
interfaces, use the Create/Edit Interface dialog box. See
Interfaces/VLANs Page—Interfaces Tab, page 65-7.
Table65-18 VLAN Access Lists Page (Continued)
Element Description
Table65-19 Create and Edit VLAN ACL Dialog Boxes
Element Description
VLAN ACL Name The user-defined name for the VACL.
VLANs (Select button) Enables you to designate the VLANs to which the VACL should be
applied. Do one of the following:
Enter VLAN IDs. You can use commas to separate multiple
VLANs or use a hyphen to indicate a range of VLANs. For
example: 12,17,22 or 2-200. Valid IDs range from 1 to 4094.
Click Select to open the VLAN Selector Dialog Box, page 65-36.