60-52
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 60 Router Device Administration
VTY Policy Page
VTY Line Dialog Box—Setup Tab
Use the Setup tab of the VTY Line dialog box to define the basic parameters of the VTY line. This
includes the password for accessing the line, the privilege level assigned to users, the protocols that are
permitted on the line, and the ACLs that limit access.
Navigation Path
Go to the VTY Line Dialog Box, page 60-51, then click the Setup tab.
Related Topics
•Defining VTY Line Setup Parameters, page 60-38
•VTY Line Dialog Box—Authentication Tab, page60-55
•VTY Line Dialog Box—Authorization Tab, page60-56
•VTY Line Dialog Box—Accounting Tab, page60-57
•Console Page—Setup Tab, page60-42
Field Reference
Authorization tab Defines the types of AAA authorization to perform on users who access
the VTY line. See VTY Line Dialog Box—Authorization Tab,
page 60-56.
Accounting tab Defines the types of AAA accounting to perform on users who access
the VTY line. See VTY Line Dialog Box—Accounting Tab,
page 60-57.
Table60-21 VTY Line Dialog Box (Continued)
Element Description
Table60-22 VTY Line Dialog Box—Setup Tab
Element Description
Starting VTY Line Number The relative line number of the VTY line. If you are configuring a group
of VTY lines, enter the number of the first line in the group. Valid
values range from 0 to 15.
Note Although different routers support a different number of VTY
lines (from four to several thousand), Security Manager
supports a maximum of 16 lines per device. You cannot
configure the same line number more than once.
Ending VTY Line Number Applies only when configuring a group of lines.
The relative line number of the last VTY line in the group.
Note When you configure a group of lines, all the lines in the group
must fall within one of two ranges, 0-4 or 6-15.