65-51
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter6 5 Managing Cisco Catalyst Switches and Cisco 7600 Series Routers
IDSM Settings
Field Reference
IDSM Slot-Port Selector Dialog Box
Use the IDSM Slot-Port Selector dialog box to associate slot-port objects with EtherChannel groups.
Navigation Path
Go to the Create and Edit IDSM EtherChannel VLANs Dialog Boxes, page 65-49 or the Create and Edit
IDSM Data Port VLANs Dialog Boxes, page 65-50, then click Select in the Slot-Port field.
Related Topics
•VLAN Selector Dialog Box, page 65-36
•Filtering Tables, page1-45
Field Reference
Table65-24 Create and Edit IDSM Data Port VLANs Dialog Boxes
Element Description
Slot-Port Associates the chassis slot number (in which the relevant services
module is installed) with the data port in the format x -y, where x is the
slot number and y is the port number. For example, 2-1 refers to data
port 1 in slot 2.
Click Select to open the IDSM Slot-Port Selector Dialog Box,
page 65-51. From here, you can select the IDSM slot-port combinations
to include in the data port VLAN definition.
Mode The running mode of the data port:
•Capture (IDS)—The IDSM2 passively monitors network traffic
that was copied to its data ports by the Catalyst switch using either
VACL capture or SPAN.
•Trunk (IPS)—The IDSM2 operates as an 802.1Q trunk by
performing VLAN bridging between pairs of VLANs within the
same data port.
Capture Enabled Applies only when the running mode is Capture (IDS).
When selected, configures the specified channel group as a capture
destination. When deselected, the channel group does not act as a
capture destination.
VLAN IDs (Select button) Identifies which VLANs the specified data port should allow.
Click Select to open the VLAN Selector Dialog Box, page65-36. From
here, you can select VLANs to include or exclude.
Table65-25 IDSM Slot-Port Selector Dialog Box
Element Description
Available IDSM Slot-Ports
list
Displays the available slot-port definitions.