59-57
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter59 Configuring Router Interfaces
PVC Policy Page
PVC Dialog Box—Settings Tab
Use the Settings tab of the PVC dialog box to configure the basic settings of the PVC, including:
ID settings.
Encapsulation settings.
Whether ILMI and Inverse ARP are enabled.
The maximum number of PPPoE sessions.
The static domain (VPN service) name to use for PPPoA.
Navigation Path
Go to the PVC Dialog Box, page 59-55, then click the Settings tab.
Related Topics
PVC Dialog Box—QoS Tab, page59-60
PVC Dialog Box—Protocol Tab, page59-63
PVC Advanced Settings Dialog Box, page 59-65
Defining ATM PVCs, page59-50
Field Reference
Protocol tab Defines the IP protocol mappings configured for the PVC (static maps
or Inverse ARP). See PVC Dialog Box—Protocol Tab, page59-63.
Advanced button Defines F5 Operation, Administration, and Maintenance (OAM)
settings for the PVC. See PVC Advanced Settings Dialog Box—OAM
Tab, page 59-66.
Table59-22 PVC Dialog Box (Continued)
Element Description
Table59-23 PVC Dialog Box—Settings Tab
Element Description
PVC ID settings
VPI The virtual path identifier of the PVC. In conjunction with the VCI,
identifies the next destination of a cell as it passes through a series of
ATM switches on the way to its destination. Valid values for most
platforms range from 0 to 255.
For Cisco 2600 and 3600 Series routers using Inverse Multiplexing for
ATM (IMA), valid values range from 0 to 15, 64 to 79, 128 to 143, and
192 to 207.
Note VPI/VCI values must be unique for all the PVCs configured on
a selected interface. VPI/VCI values are unique to a single link
only and might change as cells traverse the ATM network.