54-43
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter54 Configuring Routing Policies on Firewall Devices
Configuring RIP
•RIP - Interface Tab, page54-47
Navigation Path
•(Device view) Select Platform > Routing > RIP from the Device Policy selector.
•(Policy view) Select PIX/ASA/FWSM Platform > Routing > RIP from the Policy Type selector.
Select an existing policy from the Shared Policy selector, or create a new one.
When creating a shared RIP policy, you must choose a Version in the Create a Policy dialog box, as
follows:
–
PIX/ASA 6.3-7.1 and FWSM
–
PIX/ASA 7.2 and Later
When assigning a shared RIP policy, be sure to assign the appropriate RIP policy for the device. For
example, you cannot assign a PIX/ASA 7.2+ RIP policy to an FWSM.
Related Topics
•Configuring Static Routes, page 54-48
•Configuring OSPF, page54-2
•Configuring No Proxy ARP, page 54-1
•RIP Page for PIX/ASA 6.3–7.1 and FWSM, page 54-41
RIP - Setup Tab
Use the Setup panel to define RIP on the security appliance, and to configure global RIP protocol
parameters. You can only enable a single RIP process on the security appliance.
Navigation Path
You can access the Setup tab from the RIP Page for PIX/ASA 7.2 and Later, page54-42.
Related Topics
•RIP - Redistribution Tab, page54-45
•RIP - Filtering Tab, page54-46
•RIP - Interface Tab, page54-47
•Chapter 54, “Configuring Routing Policies on Firewall Devices”