59-64
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 59 Configuring Router Interfaces
PVC Policy Page
Field Reference
Define Mapping Dialog Box
Use the Define Mapping dialog box to configure the IP protocol mappings to use on the ATM PVC.
Mappings are required by the PVC to discover which IP address is reachable at the other end of a
connection. Mappings can either be learned dynamically using Inverse ARP (InARP) or defined
statically. Static mappings are best suited for simple networks that contain only a few nodes.
Note Inverse ARP is only supported for the aal5snap encapsulation type. See PVC Dialog Box—Settings Tab,
page 59-57.
Tip Use the CLI or FlexConfigs to configure mappings for protocols other than IP.
Navigation Path
Go to the PVC Dialog Box—Protocol Tab, page59-63, then click Add or Edit.
Related Topics
•PVC Dialog Box, page 59-55
•Defining ATM PVCs, page59-50
Table59-25 PVC Dialog Box—Protocol Tab
Element Description
IP Protocol Mapping Displays the IP protocol mappings configured for the PVC.
Add button Opens the Define Mapping Dialog Box, page 59-64. From here you can
define an IP protocol mapping.
Edit button Opens the Define Mapping Dialog Box, page 59-64. From here you can
edit the selected mapping.
Delete button Deletes the selected mapping from the table.