Cisco Systems CL-28826-01 Device Information PageNew Device

3-26

User Guide for Cisco Security Manager 4.4

OL-28826-01

Chapter 3 Managing the Device Inventory

Adding Devices to the Device Inventory

When you are finished filling in the device information, click Next to proceed to the Device Credentials

page.

Step 4 (Optional) On the Device Credentials page, enter the usernames and passwords required to log into the

device. Typically, you need to enter the primary device credentials, which are the traditional User EXEC

mode and Privileged EXEC mode passwords. If you do not enter credentials, you can add them later on

the Device Properties page.

For information on the different types of credentials, see Device Credentials Page, page 3-44.

Click Next.

Step 5 (Optional) On the Device Grouping page, select the group to which the device should belong, if any. See

Device Groups Page, page 3-48

Step 6 Click Finish. The device is added to the inventory.

Tip If you are adding a PIX, ASA, or FWSM device, you should discover the factory default settings

for the device and its security contexts. For more information, see Discovering Policies on

Devices Already in Security Manager, page 5-15.

Device Information Page—New Device

Use the New Device wizard’s Device Information page for adding new devices (that do not yet exist in

the network) to specify the device’s identifying information.

Navigation Path

To start the New Device wizard, from Device view, select File > New Device, or click the Add button

in the device selector.