Cisco Systems CL-28826-01 RIP - Redistribution Tab

54-45

User Guide for Cisco Security Manager 4.4

OL-28826-01

Chapter54 Configuring Routing Policies on Firewall Devices

Configuring RIP

RIP - Redistribution Tab

Use the Redistribution panel to manage redistribution routes. These are the routes that are being

redistributed from other routing processes into the RIP routing process. See Add/Edit Redistribution

Dialog Box, page 54-45 for more information.

Navigation Path

You can access the Redistribution tab from the RIP Page for PIX/ASA 7.2 and Later, page 54-42.

Use the Add Redistribution and Edit Redistribution dialog boxes to add and edit redistribution routes on

the RIP - Redistribution Tab, page54-45. These are the routes that are be ing redistributed from other

routing processes into the RIP routing process. Except for their titles, these two dialog boxes are

identical.

Navigation Path

You can access the Add and Edit Redistribution dialog boxes from the Redistribution tab on the RIP Page

for PIX/ASA 7.2 and Later, page 54-42.

Field Reference

Enable Auto-Summary When Send and Receive Version 2 is the chosen RIP Version, this

option is available. When checked, automatic route summarization is

enabled. Disable automatic summarization if you must perform routing

between disconnected subnets. When automatic summarization is

disabled, subnets are advertised.

Note RIP Version 1 always uses automatic summarization—you

cannot disable it.

Table54-30 Setup Tab (Continued)

Element Description

Table54-31 Add/Edit Redistribution Dialog Box

Element Description

Protocol to Redistribute Choose the routing protocol to redistribute into the RIP routing process:

•Static – Static routes.

•Connected – Directly connected networks.

•OSPF – Routes discovered by the OSPF routing process.

If you choose OSPF, you must also enter the OSPF Process ID and,

optionally, Match criteria.