3-47
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 3 Managing the Device Inventory
Working with the Device Inventory
Navigation Path
To open the RX-Boot Mode Credentials dialog box, click RX-Boot Mode in the Device Credentials Page
in either the New Device wizard (when adding a device manually or from the network), or the Device
Properties page.
SNMP Credentials Dialog Box
Use the SNMP Credentials dialog box to add SNMP credentials.
Navigation Path
To open the SNMP Credentials dialog box, click SNMP in the Device Credentials Page, page3-44 in
either the New Device wizard (when adding a device manually or from the network), or the Device
Properties page.
Field Reference
Table3-11 SNMP Credentials Dialog Box
Element Description
SNMP V2C
These are the credentials for devices running SNMP version 2.
RO Community String The read-only community string. In the Confirm field, enter the
community string again.
RW Community String The read-write community string. In the Confirm field, enter the
community string again.
SNMP V3
These are the credentials for devices running SNMP version 3.
Username The SNMP version 3 authentication user name.
Password The SNMP version 3 authentication user password. In the Confirm
field, enter the password again.
Auth Algorithm The authorization algorithm for encrypting the password. You can
choose MD5 or SHA-1.
Privacy Password The SNMP version 3 encryption user password. In the Confirm field,
enter the password again.
Privacy Algorithm Specify the encryption level by choosing an encryption algorithm and
version:
DES – Apply the Data Encryption Standard cipher algorithm, using
56-bit keys..
3DES – Use Triple DES; the Data Encryption Standard cipher
algorithm is applied three times to each packet.
AES128 – Use the Advanced Encryption Standard with 128-bit
keys.
AES192 – Use the Advanced Encryption Standard with 192-bit
keys.
AES256 – Use the Advanced Encryption Standard with 256-bit
keys.