Cisco Systems CL-28826-01 Trap Receiver Dialog Box

60-71
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 60 Router Device Administration
SNMP Policy Page
Trap Receiver Dialog Box
Use the Trap Receiver dialog box to define the SNMP hosts that receive traps generated by the router.
This includes defining the version of SNMP to use.
Navigation Path
Go to the SNMP Policy Page, page 60-69, then click the Add or Edit button beneath the Trap Receiver
table.
Related Topics
•SNMP Policy Page, page 60-69
•Permission Dialog Box, page 60-70
•SNMP Traps Dialog Box, page 60-72
•Defining SNMP Agent Properties, page 60-67
•SNMP on Cisco IOS Routers, page 60-66
Field Reference
Read-Write This community string type provides read-write access to all objects in
the MIB (except community strings).
Read-Only This community string type provides read-only access to all objects in
the MIB (except community strings). This is the default.
Table60-30 Permission Dialog Box (Continued)
Element Description
Table60-31 Trap Receiver Dialog Box
Element Description
Host IP Address The IP address of the SNMP host receiving the traps generated by the
router. Enter an IP address or the name of a network/host object, or
click Select to select the object from a list or to create a new one.
SNMP Version The version of SNMP to use—version 1, version 2c, or version 3.
Community String Applies only when version 1 or version 2c is selected.
The password required to access the SNMP host. Enter the string again
in the Confirm field.
Note We recommend that you use one of the strings defined in the
Permissions table as the password to the SNMP host. You may,
however, enter a different password. String length ranges from
1 to 128 characters. Your entry does not appear in the
Permissions table and is read-only.