Basic Call Handling
Cisco Unified Wireless IP Phone 7921G Phone Guide for Cisco Unified Communications Manager 7.0 31
Basic Call Handling
You can perform basic call-handling tasks using a range of features and services. Feature availability
can vary; see your system administrator for more information.

Placing a Call—Basic Options

Here are some easy ways to place a call on your wireless IP phone.
Note Your system administrator can configure your phone to alert you (by beeping) when it is out
of range of the wireless network. You can only use your phone if it is within range of the
wireless network. For more information, see your system administrator.
If you want to... Then...
For more information,
see...
Place a call using the
handset
1. Dial the phone number.
2. Press to place your call.
Note No dial tone occurs.
Answering a Call,
page 36
Place a call using the
speaker mode on the
handset
1. Press and hold button to activate the
speaker.
2. Dial the phone number.
3. Press to place your call.
Note Press and hold button again to turn
off speaker mode.
Using a Handset,
Headset, and
Speakerphone,
page 65
Redial a number Press twice or choose Options > Redial.
Place a call while another
call is active (using the same
line)
1. Choose Hold.
2. Choose Options > NewCall.
3. Dial, redial, or speed dial a number.
Note You hear dial tone with NewCall.
Using Hold and
Resume, page 38